Leaded Tin Bronze
ALLOY:- LTB-5
STANDARD:- IS 318:1981
| CHEMICAL COMPOSITION |
MIN (%) |
MAX(%) |
| Copper (cu) |
BALANCE |
| Tin (Sn) |
9.00 |
11.00 |
| Lead (Pb) |
8.00 |
11.00 |
| Zinc (Zn) |
- |
1.00 |
| Nickle (Ni) |
- |
2.00 |
| Iron (Fe) |
- |
0.35 |
| Antimony (Sb) |
- |
0.50 |
| Aluminium (Al) |
- |
0.01 |
| Silicon (Si) |
- |
0.02 |
| MECHANICAL PROPERTIES |
Minimum Values |
| Molding Process |
Sand Casting |
Continuous Casting |
| Tensile Strength Rm (MPa) |
180 |
220 |
| 0,2% Proof Strength Rp0,2 (MPa) |
80 |
110 |
| Elongation (%) |
5 |
8 |
| Hardness |
60 |
70 |
| EQUIVALENT INTERNATIONAL STANDARD |
| STANDARD |
ALLOY |
| BS 1400 |
LB2 |
| DIN 1716 |
G-CuPb10Sn |
| EN 1982 |
CuSn10Pb10-C |
| ASTM B505 |
C93700 |
| JIS H2207 |
LBC 3 |
| UNI 7013-8: 1972 |
G- CuSn10Pb10 |
| TECHNICAL CHARACTERISTIC |
| Suitable for friction bearing for application with high surface pressure, high speed, impact and vibration. |
| Infused with Special anti-friction capacity inherent to the metal |
| Material with high resistance to wear and traction |
| Corrosion resistant |
